Customer conversions

Repowering an F660 with a Honda GX200

Good morning, Here are some photos of the GX200 engine I bought from you, which I was able to easily adapt to the Honda F660. Everything works very well. Thank...

Repowering a Honda F650 with a Villiers G200

photos of an engine purchased in 09/2019 and mounted on a Honda F 650 tiller.

Repowering a Honda F42 with a PM65-XS-22

Hello, the engine runs like clockwork. FYI. I'm a weekend DIYer. There were no serious problems with the assembly; I just had to take my time. Package ordered Thursday evening....

Repowering a Honda F42 with a PM65-XS-22

an 86-year-old child found his toy Thank you for trusting us to repower your rototiller.

Repowering a Honda F42 with a Villiers G200

Hello Madam/Sir, I have just finished adapting the F42 kit with the Villiers G200V engine No particular problem for an experienced and well-equipped DIY enthusiast. However, for others it would...

Replacing a GX140 engine with a GX160-SX engine on a Honda F560 tiller

Replacing a GX140 engine with a GX160-SX engine on a Honda F560 tiller No dimensional problems, however - When mounting the motor on the frame, take care to adjust the...

Re-engining a Honda F50 tiller with an Ecomoteur EM65

Repowering a Honda F460 with an Ecomoteur EM55-XS-18

Good morning, Perfect, the engine is in place and working perfectly. Regarding the accelerator, I did indeed loosen the nyloc nut and install my accelerator cable. (see photo Ecomoteur_03) Regarding...

Engine replacement on an ISEKI KS250 with an Ecomoteur EM65

I received the engine in the best condition and as you can see from the attached photos, I installed it and used the rototiller as a cultivator with satisfaction. The...

Engine replacement on an Iseki KC4 KF340 KC350F KC450F

Engine replacement on an Iseki KC4 KF340 KC350F KC450F with a Villiers / Promoter G200 with 18mm shaft

Engine replacement on an Iseki KS280 with a Honda GX200 with electric start

Good morning Here are some photos of my grandfather's KS280 rototiller that I refurbished with your GX200 kit. You can publish them if you wish. I'm very happy with the...

Engine replacement on an Iseki KS280 with a Lifan

Engine replacement on Iseki KC2-19 with Kohler RH265

Good morning, Attached is the part number for the engine belt kit kitkc219 following yesterday's phone conversation SINCERELY

Engine replacement on Iseki KC350F with the Villiers G210-VFC

Following my purchase of the engine from you and my phone call today, I am sending you, as agreed, the photos of my KC 350F rototiller, which dates from December...

Adaptation of the Kohler S 8.5 engine to my Iseki KS 652 diesel

Hello to the whole team Following the installation of my engine, I would like to know what I will need. to start it using a battery Wiring diagram for connecting...

Iseki KC4 conversion with Villiers G210-VFC

Conversion of a Kubota T620 with an Ecomoteur EM70-XR

Good morning, Following the purchase of an engine kit for Kubota T620, I am sending you some photos of the adaptation on my tiller. In your assembly examples, I found...

Conversion of a Kubota T750 with an Ecomoteur EM70-XR

Excellent service from your team, great telephone contact with your secretary, who was very competent and professional. A few photos of the modification (sent in several installments) didn't upload. First...

Conversion of a Kubota T850 with an EM90-XRG Ecomotor

Conversion of a KUBOTA T850 tiller with an EM90-XRG eco-engine At the base 2 profiles of 80x80 then 2 profiles of 55 high, offset so as to be able to...

Replacement engine kit for Kubota T550 with Kohler

Good morning, Thanks to SDC Import for their responsiveness Replacing my Kubota T550 tiller's GS160 engine with a Kohler CH270-red 7hp engine So I took advantage of this engine change...

Kubota T620 repowering with EM65-XR 20mm engine and electric starter

Purchase of 1 replacement engine kit for KUBOTA tillers with reduction gear As agreed, I am sending you the photos concerning the mounting of the Eco engine on the T620...

Kubota LP 360 repowering with a Villiers G200 VFC engine

Starting from your Kubota kit. Adaptation of the supplied mounting brackets. Extension of the chassis using 45mm square drive. A little bit of welding and painting. Difficulty finding a belt...

Old Kubota GH 120 with an EM65 XS 20mm Ecomotor

"Good morning, Thank you for the prompt processing of my order. I ordered it on Sunday, received it this Wednesday morning, and installed it this afternoon to replace an old,...

Kubota rototiller replaced by Villiers G200VFC

First, we bored out the drive pulley and used shims to align the belts (since they weren't the same diameter), and we made brackets. Next, we fabricated a plate (drilled...

Converting a Mitsubishi CT335 tiller with a Lifan Ecomoteur EM65-XR engine

Hello, attached are some photos of the engine after a few hours of adaptation on a Mitsubishi CT335. Everything works perfectly Sincerely.

Conversion of Mitsubishi CT154 tiller with Ecomoteur EM55-XR

Hello Mrs, I have contacted your company to request a replacement engine for a Mitsubishi CT 154 tiller. I am sending you, as attachments, some photos of the result of...

Mitsubishi rototiller replaced by Villiers G200VFC

The engine on my old Mitsubishi rototiller was faulty, but the attachments (tines, wheels, share) were still usable. So I decided to replace the engine. I searched online and found...

Engine replacement on a Mitsubishi CT154 by a Promoter G200

Engine replacement on a Mitsubishi CT154 by a Promoter G200 https://sdc-imports.fr/epages/box11408.sf/fr_FR/?ObjectPath=/Shops/box11408/Products/VIL-G200-V/SubProducts/PM65-XR-1800

Replacement on a Staub with the EM90v Ecomotor

Hello everyone, I'm sending you some photos of the engine we just received and which is now operational. Installation went without a hitch, and you can see the delighted owner...

Replacing a Lombardini IM350 on a Staub 9500 with an Italian Kohler CH395

Following the purchase of a KOHLER PRO 9.5 engine to replace a Lombardini IM350 engine on my STAUB 9500 tiller, we carried out this replacement by my son-in-law Rudy very...

Engine replacement in Villiers-sur-Staub PPX2 with a Honda engine

Hello Mrs. I am attaching photos of the Honda engine transplant onto the Staub. I had to make some modifications to the Staub and fabricate a spacer between the engine...

Staub PPXS6 repowering - Bernard W239A engine replaced by Ecomoteur EM90

Good morning Here, albeit belatedly, are some photos of the installation of the 270cc EcoMoteur engine on a PPXS6 tiller. I connected the clutch and throttle cables directly because I...

Engine replacement on a STAUB PPX8 with a Kohler CH395 with an Italian shaft

Bernard 239a engine replacement on STAUB PPX with Honda GX240 engine

Good morning, As agreed during our telephone conversation today, here are the photos of the Honda engine conversion on Staub PPX. I would like to reiterate my complete satisfaction and...

Engine replacement on Staub PPX 6000 with Honda GX270 engine

As promised, here are the photos of the old STAUB PPX 6000... year of manufacture 1981, modified in 2020 Second printing I was missing the part to secure the accelerator...

Replacing the Bernard W239A engine on a Staub PPXS4 with a Villiers G270 engine

Good morning, Following my order from you for an adapter engine for my Staub rototiller, I have finished everything I reassembled it and tried it a few days ago now....

SOLO IHI SK181 tiller replaced by Villiers G200VFS

First of all, I would like to congratulate you on your commercial website, the rigor and efficiency in ordering and tracking the package until delivery. After receiving the package within...

Conversion of a SOLO IHI with an EM55 Ecomotor

Beste, The motor should not be replaced by a new motor. Ben hier zeer tevreden over. Ik voeg nog wat foto's toe. Grts translation: Dear, Very good engine and can...

Universal kit for Solo tiller with Ecomoteur

With Ecomoteur EM70-XR-22 engine Hello, my details are BL00001594, customer CL04375/20660, order 20899, €285 Attached are photos of the adaptation to the Solo SK 18 rotary tiller. fix the new...

Stafor type S6 B with a Bernard 117 bis engine replaced by a Honda GC160

Hello, As promised here are some photos of the Stafor brand tiller type S6 B originally fitted with a Bernard 117 bis engine. Replaced by a Honda GC160 engine, 19.05mm...

Stafor S6B rotary tiller. Bernard engine replaced by a Villiers G200VFS-B

Following a faulty ignition coil on a Bernard engine, and after several unsuccessful searches for a replacement, I decided to replace the entire engine. After some research and advice from...

Stafor S9 rotary tiller with Bernard HS engine replaced by Villiers G200V

Installation of a 19.05mm spacer, 22mm outside diameter Tapping of the Masselotte support and fixing with two set screws. Installation of a mounting plate because the Villiers engine is larger...

Stafor rotary tiller - Bernard W117 engine replaced by Honda GX200 QX4

Having already owned a Stafor 117 with tines, which I wasn't disappointed with, I decided to buy another one, but this time with all the accessories for better soil preparation....

Replacement engine for Bouyer 205 with Villiers G200-VFQ

Good morning, I am contacting you again following my request for information regarding my Bouyer 205 and the replacement of the 5HP Brigs & Stratton engine. Following your advice, I...

Bouyer 467s rotary tiller with Briggs & Stratton Intek Pro 6.5

Replacement engine for Bouyer 111 with Villiers

With Villiers G200-VFQ engine Good morning, Thank you for your advice. I installed the motor this weekend and everything works. I'm sending you some photos as attachments. Replacing a Briggs...

ROBIN PR14 tiller, old EY14B engine replaced by an EM65 eco-engine

Good morning; Here are some photos of my new Ecomoteur EM65-XR motor mounted on a Robin PR 14 (previously an EY14B motor). I hope this information is useful for your...

Robin PR07 2-stroke with EM70

Old ROBIN PR07 tiller, 2-stroke with a new ECOMOTEUR EM70 engine. A quick email to let you know that I am completely satisfied with my new ECOMOTEUR engine. I was...

ROBIN PR13 tiller replaced by Villiers G160VFC

After years of use without any maintenance, the engine of my Robin PR13 rototiller was out of order. And unfortunately, for this machine, almost 40 years old, it was impossible...

Bernard 417 engine conversion by Villiers G200 on a Hako Hakorette 200

Transformation hako hakorette 200 engine Bernard 417 by Villier g200 The motor can be fitted without using a special plate. Use the rear oblong holes (in the maximum forward position)...

Hako combination unit, former Bernard W117bis engine replaced by EM65-X 6.5HP

Engine conversion of my first Hako combination unit: narrow gauge and equipped with a very tired Bernard w117 bis engine (the exhaust valve tended to get stuck!). I chose to...

Hako combination unit, old JLO engine replaced by EM65-X 6.5HP

Hako combination machine with JLO 2-stroke engine, replaced by a 6.5HP EM65-X Engine conversion of my second Hako combination machine: wide track and equipped with a JLO 2-stroke engine, which...

Engine replacement on a Goldoni Bingo rototiller by a G210 Promoter

Product ordered: https://sdc-imports.fr/epages/box11408.sf/fr_FR/?ObjectPath=/Shops/box11408/Products/KIT-ITAL/SubProducts/KIT-ITAL-0008

Italian engine replacement on a 1996 Goldoni Bingo tiller

Thank you for your kindness. I would recommend you to others; the service was perfect, nothing to complain about. Minor issue with the plate thickness, which I had rectified by...

Replacement on an OREC with a Honda GX270

Replacement for YANMAR tiller with 18mm output and reducer

Good morning, As agreed, we are sending 2 photos of the engine that you sent us and installed on the chassis of the Yanmar type YK 45 DFF cultivator, which...

Grillo engine replaced with a Kohler CH270 with an Italian tapered shaft in Switzerland

Grillo engine replacement A little over an hour of work A professional result. Thank you

Replacing the 5HP Briggs & Stratton engine on a Roques et Lecoeur tiller with a Villiers G210-VFQ

The rototiller is a Roques Lecoeur, the engine is a Briggs & Stratton 5 HP. The engine details I was able to find are: model 130232, type 089101, code 78100307...

Briggs&Stratton 3.5HP engine replacement with Villiers G200-VFQ (6.5HP)

Hello, a quick update following the purchase and installation of the Villiers G200 motor. No complaints about the installation or the start-up; it was perfect. However, the safety push button...

Kawasaki engine replacement on Yanmar YK350s with a Honda GX160-red engine

Good morning, I wanted to thank you for all the information you gave me. A little late, but here are some photos of the YK350SF rototiller, which has successfully regained...