Repowering an F660 with a Honda GX200
Good morning, Here are some photos of the GX200 engine I bought from you, which I was able to easily adapt to the Honda F660. Everything works very well. Thank...
Rupert Carr |
Honda customer repowering
Repowering an F660 with a Honda GX200
-
Honda F650 repowering with an Ecomoteur EM70 engine
Good morning , Some photos of the "new rototiller" I am very satisfied with your service and grateful to you.
Rupert Carr |
-
Honda F610 repowering with a Honda GX200 engine
I wanted to congratulate you on the timely delivery of the engine and the fact that the packaging arrived undamaged. I installed the engine, readjusted some settings such as the...
Rupert Carr |
-
Honda F610 repowering with a Honda GX 200 engine
Replacing a Honda GX 140 engine with a Honda GX 200 engine on a Honda F610 tiller. The engine blocks are exactly the same, it's the accessories that need to...
Rupert Carr |
-
Honda F610 Tiller Repowering
Honda F610 rototiller equipped with a Villiers G200VFS engine. Quick adaptation, works very well apart from a few modifications: exhaust and throttle control. Congratulations to the seller, I will recommend...
Rupert Carr |
-
Repowering a Honda F600 with a Villiers G200 engine
Conversion of an F600 with a Villiers G200 engine Delivered to Italy "Look at my Honda now!" Thank you very much for your engine."
Rupert Carr |
-
Re-engining of Honda F600 with a G200 engine, replaced by a Loncin G200FS
The engine of my Honda F600 tiller was nearing the end of its life. After consulting your website, I decided to replace it with a Loncin G200 engine. After a...
Rupert Carr |
-
Honda F600 G200 engine replaced by Villiers G160VFC
After removing the broken engine, the first thing to do was rebuild the chassis, which had suffered from years of use. Afterward, attaching the adapter parts was straightforward and easy;...
Rupert Carr |
-
-
Repowering a HONDA F560 with a Honda GX200-SX (20mm) engine
Replacing a Honda GX140 engine on an F560 tiller. Normally, a replacement for a Honda GX140 would be a GX160, but I preferred to switch to a GX200 to have...
Rupert Carr |
-
Re-engining HONDA F400 with an Ecomoteur EM55-XR-18 gearbox
Invoice No.: BL00001701 dated 12/06/2018 Customer Code: CL04469 After consulting numerous websites, my choice has fallen on MAG MOTEURS DIRECT I am ordering an EM55 engine to replace the Honda...
Rupert Carr |
-
Honda F400 engine repowering with Ecomoteur EM40-XS-18mm
I'm sending you these three photos showing the replacement of a Honda engine with the compatible one I purchased from you. The installation was easy; I just had to adapt...
Rupert Carr |
-
Repowering a Honda F300 with a Villiers G160 engine
Conversion of a Honda F300; the customer purchased the kit for a standard Honda F400. "First of all, I would like to thank the person I spoke to on the...
Rupert Carr |
-
Re-engining a HONDA F50 with an Ecomoteur EM70-XS-22mm
C. j-Luc No. BL00001597 Customer code CL04378 Hello everyone. I swapped the motor on my Onda G50 for an ecomoteur EM70. The shims provided are too short. The problem is...
Rupert Carr |
