C. j-Luc
No. BL00001597
Customer code CL04378
Hello everyone.
I swapped the motor on my Onda G50 for an ecomoteur EM70.
The shims provided are too short. The problem is that the rocker cover is hitting the frame. So I made shims out of 100mm U-shaped iron to prevent it from touching. Another issue: consider the belt. It's an automatic variator, and the belt shouldn't be under tension at low RPMs.
I loosened the screw on the accelerator and put in a stiffer return spring, I don't want to have to chase after the rototiller to stop it.
Everything is fine now and I'm delighted that it's starting well. To shut off the engine, you can use the old button to ground it.
