Repowering an F660 with a Honda GX200
Good morning, Here are some photos of the GX200 engine I bought from you, which I was able to easily adapt to the Honda F660. Everything works very well. Thank...
Rupert Carr |
Honda customer repowering
Repowering an F660 with a Honda GX200
-
Repowering a Honda F650 with a Villiers G200
photos of an engine purchased in 09/2019 and mounted on a Honda F 650 tiller.
Rupert Carr |
-
Repowering a Honda F42 with a PM65-XS-22
Hello, the engine runs like clockwork. FYI. I'm a weekend DIYer. There were no serious problems with the assembly; I just had to take my time. Package ordered Thursday evening....
Rupert Carr |
-
Repowering a Honda F42 with a PM65-XS-22
an 86-year-old child found his toy Thank you for trusting us to repower your rototiller.
Rupert Carr |
-
Repowering a Honda F42 with a Villiers G200
Hello Madam/Sir, I have just finished adapting the F42 kit with the Villiers G200V engine No particular problem for an experienced and well-equipped DIY enthusiast. However, for others it would...
Rupert Carr |
-
Replacing a GX140 engine with a GX160-SX engine on a Honda F560 tiller
Replacing a GX140 engine with a GX160-SX engine on a Honda F560 tiller No dimensional problems, however - When mounting the motor on the frame, take care to adjust the...
Rupert Carr |
-
-
Repowering a Honda F460 with an Ecomoteur EM55-XS-18
Good morning, Perfect, the engine is in place and working perfectly. Regarding the accelerator, I did indeed loosen the nyloc nut and install my accelerator cable. (see photo Ecomoteur_03) Regarding...
Rupert Carr |
-
Honda F42 repowering with Ecomoteur EM65
Hello! The engine installation was easy with the included accessories for the modifications. I'm delighted to be able to bring my late father's rototiller back to life. Thank you to...
Rupert Carr |
-
Repowering a Honda F800 with a Villiers G390-VFC 13HP engine
Replacing an engine on a Honda F800 tiller, with reduction and a 25mm shaft. I am very happy. The motor assembly was simple; I used spacers that I made to...
Rupert Carr |
-
-
Repowering a Honda F800 with an Ecomoteur EM90-XRG
Conversion of a Honda F800 tiller with the ecomoteur EM90-XRG replacement engine (with camshaft reduction gear) Some modifications had to be made as shown in the photos. You should consider...
Rupert Carr |
-
Repowering a Honda F800 with an Ecomoteur EM90-XRG engine
Replacing a Honda G300 engine on a Honda F800 tiller replacement motor used: the EM90-XRG ecomotor
Rupert Carr |
